Important: This model can only be printed with CURA-slicer
material: ColorFabb LW-PLA | printing speed 30-40 mm/s
Please conduct your own tests with LW-PLA from other manufacturers
Free download here: Test data | CURA | LW-PLA-Info
-
Wingspan: 2006mm / 79"
-
Fuselage: 1218mm / 48"
-
Flying weight: 990g / 35,2 oz
-
Wing loading: 27g / dm²
-
Airfoil: HQ/W-2,25/9
-
2-3 channel remote control
Our TRINITY is a lightweight, agile, two-axis controlled (electric) glider with low wing loading and a spacious fuselage. The interior is easily accessible through a large, removable canopy. .
The wing uses a thermal-optimized HQ/W-2.25/9 airfoil, suitable for a wide speed range and offering excellent slow-flight characteristics, making the model suitable for less experienced pilots.
TRINITY can be built with or without a motor. The nose-mounted motor does not negatively affect the model's gliding performance, due to the center of gravity.
The horizontal stabilizer is a plug-in pendulum elevator with fully symmetrical airfoil, allowing sensitive control. But also very direct and agile handling if desired. When disassembled, it packs down to a small size.
torsionally stiff
lightweight construction
generous space
geodesic ribs
integrated Cfk-rods
Please also see our general information and tips on handling 3D-printed model airplanes. You can find this information here.
Download for free
Please perform test prints, using our free print files, before purchasing.
For your test prints, please use only LW-PLA and the print profiles and settings we have suggested for Cura-slicer and ColorFabb-LW-PLA.
LW-PLA should not be printed at speed above 60 mm/s, see ColorFabb link below.
